CISCO2951/K9

Model: CISCO2951/K9 Cisco 2951 Router ISR G2
Detail: Cisco 2951 Router w/3 GE,4 EHWIC,3 DSP,2 SM,256MB CF,512MB DRAM,IPB

Product Details (CISCO2951/K9)

Figure 1 shows the front panel of the Cisco 2951 router.

CISCO2951/K9 cisco router cheapest price

Note:

① AC OK  ② On/Off switch  ③ AC power connector  ④ Optional RPS adapter(blank panel shown)  ⑤ LEDs area

Table 1 shows the LEDs area description.

LED Color Description
SYS Solid green Solid green indicates normal operation.
Blinking green System is booting or is in ROM monitor mode.
Amber System error.
Off Power is off or system board is faulty.
ACT Green Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port.
Off No packet transfers are occurring.
PoE Green PoE is available.
Amber Power supply is not supplying PoE power.
RPS Green System is running on external RPS power supply.
PS Green System is running.
Amber System is not running.

LEDs on the back panel of the Cisco 2951 router.

Note:

① Compact flash 0 and 1 (0, right)  ② ISM  ③ PVDM3 0,1 and 2 (0 right)  ④ EN (Enable USB console)  ⑤ EN (Enable RJ-45 console)  ⑥ SFP S  ⑦ SFP EN  ⑧ S (Speed)  ⑨ L (Link)

Table 2 shows the description of these LEDs on the back panel.

LED Color Description Location
CompactFlash 1 Green Flash memory is busy. Back Panel
Amber Initialized with error.
Blinking Green then turns off CompactFlash is ready for removal.
CompactFlash 0 Green Flash memory is busy. Back Panel
Amber Initialized with error.
Blinking Green then turns off CompactFlash is ready for removal.
S (Speed) 1 blink + pause GE port operating at 10Mb/s. Back Panel
2 blink + pause GE port operating at 100Mb/s.
3 blink + pause GE port operating at 1000 Mb/s.
L (Link) Green GE link is established. Back Panel
Off No GE link is established.
EN (RJ-45 console port) Green The RJ-45 console port is active. Back Panel
EN (USB serial console port) Green The USB console port is active. Back Panel
ISM Green Initialized. Back Panel
Amber Initialized with error.
Off Not installed.
SFP S Blinking green Blinking frequency indicates port speed. Back Panel
SFP EN Off Not present. Back Panel
Green Present and enabled.
Amber Present with failure.
PVDM 0, 1 and 2 Green PVDM is initialized. Back Panel
Amber PVDM is detected but not initialized.
Off No PVDM installed.

 

Modules & Licenses

Recommended models for this router.

Models

Description

SM-ES3G-16-P

Enhanced EtherSwitch Service Module, L2/L3 switching, 16* 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology

SM-ES3G-24-P

Enhanced EtherSwitch Service Module, L2/L3 switching, 24 * 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology

VWIC3-2MFT-G703

Cisco Voice/WAN Card VWIC3-2MFT-G703

HWIC-2T

2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card

EHWIC-1GE-SFP-CU

Cisco 1900, 2900, 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU

EHWIC-4ESG

Four port 10/100/1000 Base-TX Gigabit Ethernet switch interface card for Cisco 1900 2900 3900 Routers

ISM-SRE-300-K9

Internal Services Module (ISM) with Services Ready Engine

PVDM3-16

16-channel high-density voice DSP module

MEM-CF-256U1GB

256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900

MEM-CF-256U2GB

256MB to 2GB Compact Flash Upgrade for Cisco 1900,2900,3900

MEM-CF-256U512MB

256MB to 512MB CF Upgrade for Cisco 1900,2900,3900 ISR

MEM-CF-256U4GB

256MB to 4GB Compact Flash Upgrade for Cisco 1900,2900,3900

MEMUSB-1024FT

1GB USB Flash Token

Licenses

Description

L-SL-29-SEC-K9=

Cisco 2900 License L-SL-29-SEC-K9 Security E-Delivery PAK for Cisco 2901-2951

L-SL-29-APP-K9=

Cisco Application Experience License ISR 2900 Series – includes licenses for: AppX, DATA and WAASX

L-SL-29-SECNPE-K9=

Cisco 2900 License L-SL-29-SECNPE-K9 SEC No Payload Encryption E PAK for Cisco 2901-2951

L-SL-29-UC-K9=

Cisco 2900 License L-SL-29-UC-K9= Unified Communication E-Delivery PAK for Cisco 2901-2951

Specification (CISCO2901/K9)

CISCO2901/K9 Specification

General
Device Type Router
Enclosure Type Rack-mountable – modular – 1U
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol IPSec, L2TPv3
Routing Protocol OSPF, IS-IS, BGP, EIGRP, DVMRP, PIM-SM, static IP routing, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-

based routing (PBR), MPLS, Bidirectional Forwarding Detection (BFD), IPv4-to-IPv6 Multicast

Remote Management Protocol SNMP, RMON, TR-069
Features Firewall protection, VPN support, MPLS support, Syslog support, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ),

Weighted Random Early Detection (WRED), Web Services Management Agent (WSMA), NetFlow

Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.3af, IEEE 802.3ah, IEEE 802.1ah, IEEE 802.1ag, ANSI T1.101, ITU-T G.823, ITU-T G.824
RAM 512 MB (installed) / 2 GB (max)
Flash Memory 256 MB (installed) / 8 GB (max)
Status Indicators Link activity, power
Expansion and Connectivity
Interfaces 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ Management : 1 x console – RJ-45 ¦ Management : 1 x console – mini-USB Type B ¦

Serial : 1 x auxiliary – RJ-45 ¦ USB : 2 x 4 pin USB Type A

Expansion Slot(s) 4 (total) / 4 (free) x EHWIC ¦ 2 (total) / 2 (free) x PVDM ¦ 2 (total) / 1 (free) x CompactFlash Card ¦ 1 (total) / 1 (free) x ISM
Power
Power Device Power supply – internal
Voltage Required AC 120/230 V ( 50/60 Hz )
Miscellaneous
Dimensions (W × D × H) 17.2 × 17.3 × 1.8 in (43.9 x 43.8 x 4.5 cm)
Package Weight 25.09 lbs (11.48 Kg)
Weight 13.4 lbs (6.08 Kg)
Rack Mounting Kit Included
Compliant Standards CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, CS-03, R&TTE,

FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, BSMI CNS 13438, AS/NZS 3548 Class A, CAN/CSA

C22.2 No. 60950-1, VCCI V-3, EN 61000, TIA/EIA/IS-968

Software / System Requirements
OS Provided Cisco IOS IP Base
Manufacturer Warranty
Service & Support 90 days warranty
Service & Support Details Limited warranty – 90 days
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 – 85%

Datasheet Download

cisco-2900-series-router-datasheet

Get More Information

Do you have any question about the Cisco 2901 router?

Contact us now info@greencode.co.in